Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Mountain

Scott Spark 920
$6,299.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 920. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF-Alloy Frame - FOX 34 Float Perf. 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - SRAM GX Eagle AXS 12 Speed - SRAM DB8 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
Scott Spark 930
$4,799.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 930. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF-Alloy Frame - FOX 34 Float Rhythm 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - Shimano XT-SLX 12 Speed - Shimano Deore 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
Scott Spark RC Comp (TW)
$4,299.99
The Spark RC Comp is the perfect blend of top-notch carbon engineering, never before seen levels of integration, and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. KEY FEATURES - Spark RC Carbon HMF Frame - FOX 32 Float Rhythm 120mm Fork - FOX Float Custom, 120mm, TwinLoc - SRAM NX Eagle 12 Speed - Shimano Deore Disc Brakes - Maxxis Rekon Race Foldable Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance.
Santa Cruz Bronson C R
$5,499.00
You know what's hard about choosing what model of Santa Cruz suits you? It's having to narrow down what kind of riding you want to do. But what if you don't want to be pinned down by labels? What if you want to just be a mountain biker in the broadest sense of the word? What if you want to choose how you ride rather than what to ride? If this sounds familiar, then try a Bronson. Our demo crew have a saying, 'If in doubt, take a Bronson out'. The 150mm-travel bike can go deep on any landing and the VPP suspension design makes sure that there's no wasted energy when heading back up for another go. If you value style at speed or want to have fun feeling fast, then mixed wheels (29" up front, 27.5" out back) show that the spectrum is a loop not opposite points on a scale. The larger front wheel provides more traction and stability that'll make you feel more confident squaring off the turns and diving for the inside lines. But a 27.5-inch tire in the rear means this bike still loves getting up on the back wheel and into the air. From flat out on the trail to fully flat over a table, each generation of Bronson rider redefines expectations of what a mountain biker is. Wheel Size: - Size X-Small: 27.5-inch - Sizes Small – X-Large: 29-inch front / 27.5-inch rear
Santa Cruz Bronson C S
$6,699.00
You know what's hard about choosing what model of Santa Cruz suits you? It's having to narrow down what kind of riding you want to do. But what if you don't want to be pinned down by labels? What if you want to just be a mountain biker in the broadest sense of the word? What if you want to choose how you ride rather than what to ride? If this sounds familiar, then try a Bronson. Our demo crew have a saying, 'If in doubt, take a Bronson out'. The 150mm-travel bike can go deep on any landing and the VPP suspension design makes sure that there's no wasted energy when heading back up for another go. If you value style at speed or want to have fun feeling fast, then mixed wheels (29" up front, 27.5" out back) show that the spectrum is a loop not opposite points on a scale. The larger front wheel provides more traction and stability that'll make you feel more confident squaring off the turns and diving for the inside lines. But a 27.5-inch tire in the rear means this bike still loves getting up on the back wheel and into the air. From flat out on the trail to fully flat over a table, each generation of Bronson rider redefines expectations of what a mountain biker is. Wheel Size: - Size X-Small: 27.5-inch - Sizes Small – X-Large: 29-inch front / 27.5-inch rear
Santa Cruz Hightower 3 C R
$5,499.00
THE MOUNTAIN BIKE, DISTILLED With 29-inch wheels, 145mm of rear Virtual Pivot Point (VPP) travel and a versatile personality, the newest Santa Cruz Hightower delivers mountain bike thrills over a wide range of terrain. Big on wheels, medium on travel, and short on fuss, this do-it-all model shines with a versatile balance of geometry, spec and durability. It’s mountain biking, distilled.
Santa Cruz Tallboy C R 29
$5,299.00
THE TRAIL BIKES THAT LOVE TO PLAY The Santa Cruz Tallboy combines short travel efficiency with modern geometry to create a bike that's as up for the big climb as it is the big descent. These sporty 29ers are the perfect choice for riders considering a cross country bike but will likely never race. They climb efficiently, roll fast on the on the flats, and have some real capability for when the DH music goes from easy listening to rock-and-roll. Featuring a 130mm fork and 120mm of Virtual Pivot Point (VPP) rear suspension travel, Tallboy is sporty, capable, and fun.
Santa Cruz Tallboy C S 29
$6,199.00
THE TRAIL BIKES THAT LOVE TO PLAY The Santa Cruz Tallboy combines short travel efficiency with modern geometry to create a bike that's as up for the big climb as it is the big descent. These sporty 29ers are the perfect choice for riders considering a cross country bike but will likely never race. They climb efficiently, roll fast on the on the flats, and have some real capability for when the DH music goes from easy listening to rock-and-roll. Featuring a 130mm fork and 120mm of Virtual Pivot Point (VPP) rear suspension travel, Tallboy is sporty, capable, and fun.
Salsa Salsa Rangefinder Advent X 27.5+
$1,099.00
Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 144 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts
Salsa Salsa Rangefinder Advent X 29
$1,199.00
Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 149 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts
Orbea Occam H10
$4,399.00
ARE YOU THIS RIDER? Do your friends ask if you intend to ride the chairlift when you invite them out for a 'few' park laps? Do your top routes frequently involve pushing up and down trails that aren't on any map? Do your favorite rides begin or end with headlights, an ice chest, and great friends? Does your mountain bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam is the bike for you. - Intended Use: Trail To Light Enduro LINKAGE UPDATE Occam uses a new 2-part linkage design. Fewer pieces mean fewer interfaces, greater rigidity, and a lower chance of something working itself loose. Additionally, we have created a space in the axel and filled it with a handy 4 key multi-tool which is held securely in place with magnets. Always have the most-used tools close at hand for quick tweaks. INTERNAL CABLE ROUTING Occam has our latest, fully internal cable routing, using silicon plugs at the frame entry and exit points and clever conduits linking the front and rear triangle so your cables are fully protected. ASYMMETRICAL DESIGN Instead of using a less-efficient "shock tunnel", the Occam offsets the shock to the left side of the frame, allowing the right-side support to be more central and more efficiently deal with the suspension forces acting on the front triangle. This solution enables us to tune the stiffness of this high-stress area without adding unnecessary weight. THE ASYMMETRIC/OFFSET DESIGN OFFERS UNIQUE ADVANTAGES BEYOND STIFFNESS AND LOW WEIGHT. Avoiding an interrupted seat tube gives more space for dropper posts plus improves access to the shock controls. Additionally, the tidy design leaves room for a water bottle with easy left-side access.
Orbea Occam H20 LT
$3,999.00
ARE YOU THIS RIDER? Do your friends ask if you intend to ride the chairlift when you invite them out for a 'few' park laps? Do your top routes frequently involve pushing up and down trails that aren't on any map? Do your favorite rides begin or end with headlamps, an ice chest, and great friends? Does your bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam should be your bike. - Intended Use: Trail To Light Enduro LINKAGE UPDATE Occam uses a new two-part linkage design. Fewer pieces mean fewer interfaces, greater rigidity, and a lower chance of something working loose. Additionally, we have created a space in the axel and filled it with a handy 4 key multi-tool which is held securely in place with magnets. Always have the most-used tools close at hand for quick tweaks. INTERNAL CABLE ROUTING Occam has our latest, fully internal cable routing, using silicon plugs at the frame entry and exit points and clever conduits linking the front and rear triangle so your cables are fully protected. ASYMMETRICAL DESIGN Instead of using a less-efficient "shock tunnel", the Occam offsets the shock to the left side of the frame, allowing the right-side support to be more central and more efficiently deal with the suspension forces acting on the front triangle. This solution enables us to tune the stiffness of this high-stress area without adding unnecessary weight. THE ASYMMETRIC/OFFSET DESIGN OFFERS UNIQUE ADVANTAGES BEYOND STIFFNESS AND LOW WEIGHT. Avoiding an interrupted seat tube gives more space for dropper posts plus improves access to the shock controls. Additionally, the tidy design leaves room for a water bottle with easy left-side access.
Orbea Occam M10
$5,999.00 - $6,499.00
ARE YOU THIS RIDER? Do your friends ask if you intend to ride the chairlift when you invite them out for a 'few' park laps? Do your top routes frequently involve pushing up and down trails that aren't on any map? Do your favorite rides begin or end with headlamps, an ice chest, and great friends? Does your bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam should be your bike. - Intended Use: Trail To Light Enduro LINKAGE UPDATE Occam uses a new two-part linkage design. Fewer pieces mean fewer interfaces, greater rigidity, and a lower chance of something working loose. Additionally, we have created a space in the axel and filled it with a handy 4 key multi-tool which is held securely in place with magnets. Always have the most-used tools close at hand for quick tweaks. INTERNAL CABLE ROUTING Occam has our latest, fully internal cable routing, using silicon plugs at the frame entry and exit points and clever conduits linking the front and rear triangle so your cables are fully protected. ASYMMETRICAL DESIGN Instead of using a less-efficient "shock tunnel", the Occam offsets the shock to the left side of the frame, allowing the right-side support to be more central and more efficiently deal with the suspension forces acting on the front triangle. This solution enables us to tune the stiffness of this high-stress area without adding unnecessary weight. THE ASYMMETRIC/OFFSET DESIGN OFFERS UNIQUE ADVANTAGES BEYOND STIFFNESS AND LOW WEIGHT. Avoiding an interrupted seat tube gives more space for dropper posts plus improves access to the shock controls. Additionally, the tidy design leaves room for a water bottle with easy left-side access.
Norco Fluid FS 1
$3,999.00
EVERY RIDER, EVERY TRAIL The Norco Fluid can dive into corners. And carve sweeping turns. It's as happy mixing it up in the backwoods, as it is rolling local trails. It can elevate beginner riders to intermediate. And carry intermediates to expert. It can take your weekend hobby and turn it into a lifestyle. While so many bikes are made for a specific something or somebody, what the world needs is a bike built for every rider and every trail. That's the Norco Fluid. RIDER BENEFITS THREAD THE NEEDLE - Intuitive precision handling to pick the perfect line. - Engineered using the same Norco technology and process as our top-tier Trail bikes to give you the ride of your life no matter what path you follow. POTENTIAL FULFILLED - Top-tier design and features over-deliver as skills evolve. - 6061 aluminum frame gives experienced Trail riders what they need to ride their best and helps evolving riders develop new skills and preferences without limits. CUSTOM TUNED SUSPENSION - Sophisticated suspension components for full-platform performance and tunability. - Precision-engineered 130mm rear suspension features custom-tuned dampers co-developed with the shock manufacturers provides fully customized suspension setup and performance for every rider. ROOM TO MOVE - Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain and push your limits. PERFORMANCE FOR ALL - Refined design and expanded size range for accessible Trail performance. - Boutique-level fit & finish is available in 5 frame sizes, delivering superior Trail performance to riders between 5'1" and 6'7" with components selected to offer peak performance and durability. RIDE ALIGNED - Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS to the human who rides it. - Rider-first geometry and suspension kinematics combine with custom fit and suspension tuning for personalized performance from day one.
Norco Fluid FS 2
$3,149.00
EVERY RIDER, EVERY TRAIL The Norco Fluid can dive into corners. And carve sweeping turns. It's as happy mixing it up in the backwoods, as it is rolling local trails. It can elevate beginner riders to intermediate. And carry intermediates to expert. It can take your weekend hobby and turn it into a lifestyle. While so many bikes are made for a specific something or somebody, what the world needs is a bike built for every rider and every trail. That's the Norco Fluid. RIDER BENEFITS THREAD THE NEEDLE - Intuitive precision handling to pick the perfect line. - Engineered using the same Norco technology and process as our top-tier Trail bikes to give you the ride of your life no matter what path you follow. POTENTIAL FULFILLED - Top-tier design and features over-deliver as skills evolve. - 6061 aluminum frame gives experienced Trail riders what they need to ride their best and helps evolving riders develop new skills and preferences without limits. CUSTOM TUNED SUSPENSION - Sophisticated suspension components for full-platform performance and tunability. - Precision-engineered 130mm rear suspension features custom-tuned dampers co-developed with the shock manufacturers provides fully customized suspension setup and performance for every rider. ROOM TO MOVE - Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain and push your limits. PERFORMANCE FOR ALL - Refined design and expanded size range for accessible Trail performance. - Boutique-level fit & finish is available in 5 frame sizes, delivering superior Trail performance to riders between 5'1" and 6'7" with components selected to offer peak performance and durability. RIDE ALIGNED - Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS to the human who rides it. - Rider-first geometry and suspension kinematics combine with custom fit and suspension tuning for personalized performance from day one.
Norco Fluid FS 4
$1,999.00 - $2,399.00
EVERY RIDER, EVERY TRAIL The Norco Fluid can dive into corners. And carve sweeping turns. It's as happy mixing it up in the backwoods, as it is rolling local trails. It can elevate beginner riders to intermediate. And carry intermediates to expert. It can take your weekend hobby and turn it into a lifestyle. While so many bikes are made for a specific something or somebody, what the world needs is a bike built for every rider and every trail. That's the Norco Fluid. RIDER BENEFITS THREAD THE NEEDLE - Intuitive precision handling to pick the perfect line. - Engineered using the same Norco technology and process as our top-tier Trail bikes to give you the ride of your life no matter what path you follow. POTENTIAL FULFILLED - Top-tier design and features over-deliver as skills evolve. - 6061 aluminum frame gives experienced Trail riders what they need to ride their best and helps evolving riders develop new skills and preferences without limits. CUSTOM TUNED SUSPENSION - Sophisticated suspension components for full-platform performance and tunability. - Precision-engineered 130mm rear suspension features custom-tuned dampers co-developed with the shock manufacturers provides fully customized suspension setup and performance for every rider. ROOM TO MOVE - Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain and push your limits. PERFORMANCE FOR ALL - Refined design and expanded size range for accessible Trail performance. - Boutique-level fit & finish is available in 5 frame sizes, delivering superior Trail performance to riders between 5'1" and 6'7" with components selected to offer peak performance and durability. RIDE ALIGNED - Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS to the human who rides it. - Rider-first geometry and suspension kinematics combine with custom fit and suspension tuning for personalized performance from day one.
Norco Storm 1
$1,049.00 - $1,199.00
The Storm picks up where road, gravel, and hybrid bikes can't go – fatter tires, off-road-oriented progressive design, and features that'll give riders the chance to truly experience what mountain biking is truly all about in a bike that won't break the bank. Whether you've found your way back to bike after years away, or are just exploring a new way to ride, the Storm offers quality, performance and accessibility to a wide array of riders, and is the perfect chance to give you the time and versatility to learn what kind of mountain biking is perfect for you! - 6061 Alloy Frame with smooth welds and updated geometry - 100mm Travel Suspension Fork - Internal routing for shifter and brake cables - Increased 2.35" tire fitment - 27.5" and 29" frame options depending on size - Shimano Deore 1x11 Drivetrain w/11-51T Cassette - TranzX Dropper Post - Maxxis Rekon 2.35" Tires RIDER BENEFITS: - PROGRESSIVE DESIGN: The Storm uses Norco's holistic approach to fit and geometry to achieve its nimble, confident trail performance. The unique combination of longer reach, slacker head tube angle and steep seat tube angle provides a more forward weight distribution within a longer wheelbase. This allows more powerful, efficient pedaling, increased climbing traction and added grip and control when descending to help make the most of every ride. - 100MM TRAVEL SUSPENSION FORKS: Each Storm features 100mm of front suspension travel – the perfect amount for off-road adventure and exploration, without feeling like you're carrying around extra weight or bulk when you don't need it. - INTERNAL ROUTING FOR SHIFTER AND BRAKE CABLES: By routing the brake and shift cables inside the frames, they are out of harm's way and away from the elements. That means shifting and braking performance last longer between services, and the bikes look clean! - 2.35" TIRE CLEARANCE: The Storm series comes equipped with 2.25" tires for a smooth, all-round fast ride, but the frame is designed to take up to 2.35" rubber, so if your adventures start to get a little looser, just throw on some wider tires, and the Storm is good to go! - TWO WHEEL SIZES, ONE BIKE: Depending on what frame size you ride, the Storm is available in a wheel size to suit you. The XS, and S are equipped with 27.5" tires to help fit smaller riders, and the L and XL feature 29" wheels so taller riders can take advantage of their smooth ride. If you're ride a medium, you're in luck! You get to choose either wheel size depending on your preference! Wheel size: - Sizes XX-Small – Medium: 27.5-inch - Sizes Medium – X-Large: 29-inch
Norco Storm 2
$899.00
The Storm picks up where road, gravel, and hybrid bikes can't go – fatter tires, off-road-oriented progressive design, and features that'll give riders the chance to truly experience what mountain biking is truly all about in a bike that won't break the bank. Whether you've found your way back to bike after years away, or are just exploring a new way to ride, the Storm offers quality, performance and accessibility to a wide array of riders, and is the perfect chance to give you the time and versatility to learn what kind of mountain biking is perfect for you! - 6061 Alloy Frame with smooth welds and updated geometry - 100mm Travel Suspension Fork - Internal routing for shifter and brake cables - Increased 2.35" tire fitment - 27.5" and 29" frame options depending on size - Shimano Deore 1x10 Drivetrain w/11-46T Cassette - Maxxis Rekon 2.35" Tires RIDER BENEFITS: - PROGRESSIVE DESIGN: The Storm uses Norco's holistic approach to fit and geometry to achieve its nimble, confident trail performance. The unique combination of longer reach, slacker head tube angle and steep seat tube angle provides a more forward weight distribution within a longer wheelbase. This allows more powerful, efficient pedaling, increased climbing traction and added grip and control when descending to help make the most of every ride. - 100MM TRAVEL SUSPENSION FORKS: Each Storm features 100mm of front suspension travel – the perfect amount for off-road adventure and exploration, without feeling like you're carrying around extra weight or bulk when you don't need it. - INTERNAL ROUTING FOR SHIFTER AND BRAKE CABLES: By routing the brake and shift cables inside the frames, they are out of harm's way and away from the elements. That means shifting and braking performance last longer between services, and the bikes look clean! - 2.35" TIRE CLEARANCE: The Storm series comes equipped with 2.25" tires for a smooth, all-round fast ride, but the frame is designed to take up to 2.35" rubber, so if your adventures start to get a little looser, just throw on some wider tires, and the Storm is good to go! - TWO WHEEL SIZES, ONE BIKE: Depending on what frame size you ride, the Storm is available in a wheel size to suit you. The XS, and S are equipped with 27.5" tires to help fit smaller riders, and the L and XL feature 29" wheels so taller riders can take advantage of their smooth ride. If you're ride a medium, you're in luck! You get to choose either wheel size depending on your preference! Wheel size: - Sizes XX-Small – Medium: 27.5-inch - Sizes Medium – X-Large: 29-inch
Norco Storm 4
$659.00
The Storm picks up where road, gravel, and hybrid bikes can't go – fatter tires, off-road-oriented progressive design, and features that'll give riders the chance to truly experience what mountain biking is truly all about in a bike that won't break the bank. Whether you've found your way back to bike after years away, or are just exploring a new way to ride, the Storm offers quality, performance and accessibility to a wide array of riders, and is the perfect chance to give you the time and versatility to learn what kind of mountain biking is perfect for you! - 6061 Alloy Frame with smooth welds and updated geometry - 100mm Travel Suspension Fork - Internal routing for shifter and brake cables - Increased 2.35" tire fitment - 27.5" and 29" frame options depending on size - Shimano Altus 2x7 Drivetrain - Tektro M275 Hydraulic Disc Brakes - WTB Starflight 2.25" Tires RIDER BENEFITS: - PROGRESSIVE DESIGN: The Storm uses Norco's holistic approach to fit and geometry to achieve its nimble, confident trail performance. The unique combination of longer reach, slacker head tube angle and steep seat tube angle provides a more forward weight distribution within a longer wheelbase. This allows more powerful, efficient pedaling, increased climbing traction and added grip and control when descending to help make the most of every ride. - 100MM TRAVEL SUSPENSION FORKS: Each Storm features 100mm of front suspension travel – the perfect amount for off-road adventure and exploration, without feeling like you're carrying around extra weight or bulk when you don't need it. - INTERNAL ROUTING FOR SHIFTER AND BRAKE CABLES: By routing the brake and shift cables inside the frames, they are out of harm's way and away from the elements. That means shifting and braking performance last longer between services, and the bikes look clean! - 2.35" TIRE CLEARANCE: The Storm series comes equipped with 2.25" tires for a smooth, all-round fast ride, but the frame is designed to take up to 2.35" rubber, so if your adventures start to get a little looser, just throw on some wider tires, and the Storm is good to go! - TWO WHEEL SIZES, ONE BIKE: Depending on what frame size you ride, the Storm is available in a wheel size to suit you. The XS, and S are equipped with 27.5" tires to help fit smaller riders, and the L and XL feature 29" wheels so taller riders can take advantage of their smooth ride. If you're ride a medium, you're in luck! You get to choose either wheel size depending on your preference! Wheel size: - Sizes XX-Small – Medium: 27.5-inch - Sizes Medium – X-Large: 29-inch
Norco Storm 5
$599.00 - $719.00
The Storm picks up where road, gravel, and hybrid bikes can't go – fatter tires, off-road-oriented progressive design, and features that'll give riders the chance to truly experience what mountain biking is truly all about in a bike that won't break the bank. Whether you've found your way back to bike after years away, or are just exploring a new way to ride, the Storm offers quality, performance and accessibility to a wide array of riders, and is the perfect chance to give you the time and versatility to learn what kind of mountain biking is perfect for you! - 6061 Alloy Frame with smooth welds and updated geometry - 100mm Travel Suspension Fork - Internal routing for shifter and brake cables - Increased 2.35" tire fitment - 27.5" and 29" frame options depending on size - Shimano Altus 2x7 Drivetrain - WTB Starflight 2.25" Tires RIDER BENEFITS: - PROGRESSIVE DESIGN: The Storm uses Norco's holistic approach to fit and geometry to achieve its nimble, confident trail performance. The unique combination of longer reach, slacker head tube angle and steep seat tube angle provides a more forward weight distribution within a longer wheelbase. This allows more powerful, efficient pedaling, increased climbing traction and added grip and control when descending to help make the most of every ride. - 100MM TRAVEL SUSPENSION FORKS: Each Storm features 100mm of front suspension travel – the perfect amount for off-road adventure and exploration, without feeling like you're carrying around extra weight or bulk when you don't need it. - INTERNAL ROUTING FOR SHIFTER AND BRAKE CABLES: By routing the brake and shift cables inside the frames, they are out of harm's way and away from the elements. That means shifting and braking performance last longer between services, and the bikes look clean! - 2.35" TIRE CLEARANCE: The Storm series comes equipped with 2.25" tires for a smooth, all-round fast ride, but the frame is designed to take up to 2.35" rubber, so if your adventures start to get a little looser, just throw on some wider tires, and the Storm is good to go! - TWO WHEEL SIZES, ONE BIKE: Depending on what frame size you ride, the Storm is available in a wheel size to suit you. The XS, and S are equipped with 27.5" tires to help fit smaller riders, and the L and XL feature 29" wheels so taller riders can take advantage of their smooth ride. If you're ride a medium, you're in luck! You get to choose either wheel size depending on your preference! Wheel size: - Sizes XX-Small – Medium: 27.5-inch - Sizes Medium – X-Large: 29-inch
Transition Spur GX Build
$5,999.00
The All-Country Bike Effortlessly explore, seek, and pursue the mountain in ways you never imagined. The Spur provides a sense of connection to the bike as if it were an extension to your body. Fast and efficient with an anti-gravity feel and laser-pointer precision that begs you to climb more, go farther, and descend anything you may encounter along the way. You'll instantly appreciate the free speed you're awarded while accelerating where you're usually accustomed to pedaling. Don't judge a book by its cover though, with all these lightweight and uphill oriented character traits the Spur requires no adjustment to descend like you're used to, you might actually go faster. Speed Balanced Geometry SBG ensures the bike maintains low speed agility, front wheel traction, and proper rider weight balance while actually increasing confidence in steep terrain and at high speeds. With SBG, a slacker head tube angle is combined with a all new reduced offset fork standard, preventing the front wheel from being too far in front of the rider. This improves front to rear weight distribution on the bike, which is often out of balance on long and slack bikes. One of SBG's greatest benefits is that it creates a confident steering feel that adapts to wheel speed. More stability when going fast, more agility on technical slow speed maneuvering as well as improved traction, control and confidence for any skill level of rider.
Page 1 of 1